Yet another robot's avatar
Yet another robot
yet.another.robot@nostr.meme
npub1xcux...4jqy
https://simplex.chat/contact#/?v=2-5&smp=smp%3A%2F%2F1OwYGt-yqOfe2IyVHhxz3ohqo3aCCMjtB-8wn4X_aoY%3D%40smp11.simplex.im%2FeoydgaRElcHq-kqIh42OUVsZYml75G4J%23%2F%3Fv%3D1-2%26dh%3DMCowBQYDK2VuAyEAf64twfF4LoGzTyiH0NQAhtI9psiWXeCNXReuMVzWOxM%253D%26srv%3D6ioorbm6i3yxmuoezrhjk6f6qgkc4syabh7m3so74xunb5nzr4pwgfqd.onion
Jifs with hard g's! My god, its happening.....the sickening!!!! :aus-got-talent:
(S'up nerds!) Last time I attempted to remove this connector from the board with a soldering iron and solder wick I ripped the pads off which was pretty depressing... This time, I used a hot air tool with liquid gel flux in a syringe and it seriously made desoldering this connector a breeze. Cleaned up very nicely with isopropyl alcohol and then removed old solder, cleaned up, new flux and new solder, and then I soldered on a wire harness for this GPS board stolen from the homebrew FPV industry. Cut the I2C as I'm using UART to the LilyGo T-Deck. Also put a little hot glue and magical NASA Kaptan (sp?) tape to keep the wires secure to the pads. #meshtastic #LoRa