Quick FYI for any
@npub17xvf...c9as Global Bitcoin Summit attendees who are playing with their #Bitaxe:
When I plugged mine in, the little display stayed blank. But everything else worked fine. I figured it was just a bad screen.
BUT...
IT LIVES!!!
Turns out I just needed to do a firmware update on it.
Initial Bitaxe connection:
Plug it in and, even though the screen might be blank, check the available wifi networks on your laptop. One of them should be something like "Bitaxe_blahblah". Connect to it and the Bitaxe web UI should come up.
From there you should be able to go to Settings in the web UI and I'd recommend updating the firmware FIRST.
Update firmware:
Click the links under Latest Release to save the esp-miner.bin and www.bin files. Ideally verify their hashes against the official releases.
Then Update Firmware (select the esp-miner.bin you downloaded) and Update Website (the www.bin file).
It'll reboot and you might need to tell your laptop to reconnect to the Bitaxe's wifi access point. Hopefully your Bitaxe's little display will now come to life.
Once that's done, then you can enter your wifi SSID/password via the web UI to get your Bitaxe onto your local network. Also configure your solo mining pool, btc payout address, and worker name.
Once those are saved, it'll connect to your local wifi and the previous Bitaxe wifi access point will be disabled.
ps: I recommend configuring your Bitaxe to solo mine to
Solo CKPool - Anonymous Bitcoin Mining
-- its reporting UI seems to be a bit more reliable than the sexier looking public-pool.io
pps: If you need to get back into the Bitaxe web UI once it's on your wifi network, you'll need to access it via its local IP address (watch the cycling display; one of the readouts tells you its IP) by typing that into a web browser on a device that's also connected to your local network (e.g. your phone connected to the same wifi).
CC:
@skot9000
The hope is that the RP2350 microcontroller will be an easier platform on which to port SeedSigner to MicroPython. Getting us onto a microcontroller (while still fully supporting the original Pi Zero hardware/codebase, of course!) will open up some huge new possibilities.
---
*("in time" actually means "have a preview release to demo" 'cause there's no way we could get a full final release adequately tested in time)
The raised ridge is called the "ear" and is an aesthetic thing that home breadmakers kind of obsess over. First time I've gotten one to pop up like this!
And it's hard to tell from the photo, but the oven spring (how puffy it gets when baked) is huge!
Back side of the ear has some beautiful caramelization.
Eager to cut into it but have to let it cool for a while.
Started this work in APRIL 2022!!!
I put it on the shelf ~Oct '22 but THANKFULLY @npub177zf...dp8e carried it forward and kept it alive for the next ~18 months.
Not sure I would've made it this far without his efforts!
"... More"?! Are you f'n kidding me? 🤣
Imagine being the PM who's feature didn't make the cut: "Sorry Brian, just can't justify putting a 13th item in the list; gotta keep things short and sweet so we don't overwhelm users. 12 is the sweet spot."
...to finished-enough boards ready for building!
#woodworking #diy