Okay it's not the worst. There's room for variation in the ESP32 boards. The displays are stuck on +/- about 1mm in any direction, so there's wiggle room for that. Also room for the right angle USB adapter. There's a cavity that extends out the starboard side of the pig for the cable.
I'm trying to print two halves that connect with dowels. We'll see how sloppy the seam is. Speaking of seams, doing it this way puts a seam right through the face, so that's not gonna work. Might just have to bite the bullet and print a bunch of supports in the cavity.
@LightningPiggy #lightningpiggy





