The v2 boards came in and I'm weighing my options on how to stack them. vs The main challenge is the LCD. The back of the header pins are going to short out against thr USB-C connector if I'm not careful. And the components on the back of the screen risk connecting with the header pins connecting the Nice!nano (on the bottom) with the connector PCB (in the middle). Finally, there's tolerances of all these headers pins & case alignment. Things like the boards not being perfectly parallel, the batteries beimg different thicknesses resulting in an extra mm of space for the battery. If all the cases are the same, all the things going in them need to be the same as well. Image descriptions have more detail on what you're looking at and what trade-offs are being made. Thoughts? Previous post about v1: